SH4501

Quick Fit Unit for Mounting Glass Column and Sparging Gas
with integrated gas connection, compatible to standard
filter plates and glass columns (CY4501-04),
incl. 2 silicone seals (like FI4501)

SH4502

Quick Fit Unit for Mounting Glass Column and Agitator
to foam the sample with standard agitator blade,
incl. software module for agitator control,
incl. 1 silicon seal (like FI4502),
suitable glass columns: CY4501 and CY4503

SR4501

Stirrer Blade for SH4502, plasma coated, standard geometry
nonstick coating, abrasion resistance,
coating based on silicon-/epoxy-compound

SR4502

Stirrer Blade for SH4502, electropolished stainless steel,
standard geometry, corrosion resistance,
e.g. in medical and food applications

FI4501

10 Silicone Seals for Glass Column Holder
for Sparging, outer diameter 50 mm
Silicone Seal, recommended to use with:
·  water-based systems at neutral pH
   (e.g. surfactant and salt solutions)

FI4502

10 Silicone Seals for Glass Column Holder for Agitator,
outer diameter 75 mm
Silicone Seal, recommended to use with:
·  water-based systems at neutral pH
   (e.g. surfactant and salt solutions)

FI4504

10 EPDM Seals for Glass Column Holder
for Sparging, outer diameter 50 mm
EPDM Seal, recommended to use  with:
·  water-based systems at neutral, alkaline and acidic pH
   (e.g. surfactant, salt and cleaning solutions)
·  organic and inorganic acids
·  polar organic solvents (e.g. alcohols, esters,
   ketones, amides, nitro alkanes)
·  silicone oil

FI4505

10 EPDM Seals for Glass Column Holder for Agitator,
outer diameter 75 mm
EPDM Seal, recommended to use  with:
·  water-based systems at neutral, alkaline and acidic pH
   (e.g. surfactant, salt and cleaning solutions)
·  organic and inorganic acids
·  polar organic solvents (e.g. alcohols, esters,
   ketones, amides, nitro alkanes)
·  silicone oil

CY4501

Glass Column, inner diameter 40 mm, height 250 mm,
flange 75 mm

CY4502

Glass Column, inner diameter 20 mm for small sample volume,
height 250 mm, flange 55 mm.
For usage with sample holder SH4501 the adapter PA4502
is required.

CY4503

Glass Column, double jacketed for tempered measurements
(up to 90°C), inner diameter 40 mm, height 250 mm,
flange 75 mm, with GL14-connector

CY4504

Glass Column, double jacketed for tempered measurements
(up to 90°C), inner diameter 20 mm for small sample volume,
height 250 mm, flange 55 mm, with GL14-connector.
For usage with sample holder SH4501 the adapter PA4502
is required.

FL4501

Filter Plate with Bezel, 45 mm Diameter, Porosity G1
standard width of pores 100-160 µm

FL4502

Filter Plate with Bezel, 45 mm Diameter, Porosity G2
standard width of pores 40-100 µm

FL4503

Filter Plate with Bezel, 45 mm Diameter, Porosity G3
standard width of pores 16-40 µm

FL4504

Filter Plate with Bezel, 45 mm Diameter, Porosity G4
standard width of pores 10-16 µm

TO4501

Holder for Cleaning of Filter Plate FL4501-04
to pump cleaning fluid through a filter plate
includes vacuum flask,
vacuum pump VP4501/2 optional

VP4501

Vacuum Pump (220 V) for Holder TO4501 for Cleaning of
Filter Plates

VP4502

Vacuum Pump (110 V) for Holder TO4501 for Cleaning of
Filter Plates

SY4501

50 ml Disposable Syringe, Luer, without needle,
for filling with liquid sample,
suitable for glass columns CY4501 and CY4503,
set of 25 pieces.

NE4501

Needle, suitable for SY4501,
Inner diameter: 3 mm, length: 110 mm

TP4501

Temperature Probe
for measurement of sample temperature directly
incl. fixation device,
suitable for glass columns CY4501 and CY4503

PA4501

Accessory Set for thermostattable glass columns
to connect to a thermostat,
including GL14-adapter and quick-locks,
for glass columns CY4503 and CY4504.

PA4502

Light Shield against extraneous light made of brown PMMA,
suitable for glass columns CY4501-04 and TP4501.

PA4503

Adapter for CY4502 and CY4504
for usage with sample holder SH4501
consisting of two clamps and a centering ring